wai fi

Simple ways to trouble the connectivity problem in Wi-Fi

With a Wi-Fi connection, people are able to use a wireless internet connection. Unlike the past days, they do not need to sit in a place and plug a wire into their computer to use internet. They can roam around anywhere and use internet with any devices that supports Wi-Fi. Since the emergence of this technology everyone has started to use this. There are many advantages in this network setup. However sometimes people will face some issues in using the internet through this Wi-Fi network. But there is some solution to sort of the problems that generally occurs in this connection. Since the wi-fi connection is using the radio waves there may be some interference in the signals. If you ever follow such problems, then follow the ideas which are given in the passages below.

If you cannot see a wifi network then the first basic thing that you need to check is whether the device is turned on to get Wi-Fi. Many people will not notice this simple thing and concern a lot. It is very obvious mistake that the individuals will do. They would have turned off the switch while using the system previously. When they are about to connect the wi-fi they will not notice that the switch is turned off. This will be available in the form of button in many computers and you have to check that every time you want to connect your system with Wi-Fi.

Sometimes, the button will be turned on but the system may not find any wi-fi connection. In such cases, you need to reboot your system. This is also a very basic thing that people need to do to get connected with Wi-Fi. If the system does not show any wi-fi network still then there may be some problems in the router or your system wi-fi adapter. Therefore you need to unplug your router and leave it for 10 to 15 seconds. Then you can plug it again and test the connection. This process is generally known as power cycling. By doing this method, the router will restore the functions and comes to the normal condition. If you connect the system after this process, you can easily get the Wi-Fi connection.

Generally many people will not get the Wi-Fi range when they are crossing the range which has been fixed. Similarly the connection will be difficult if the router is placed far away from the place where you need to work. In such situation, you have to enter into the Wi-Fi range otherwise you must setup the router near to your workplace. Then you will not have any problems in getting the wi-fi connection. Many individuals will face this problem and they will not be comfortable with the connection. If you have frustrated many times with this problem then you have to buy a router which can give you an extended range. This is the best way to avoid such inconveniences.


But some of the users will be in the range limit still they may not get the Wi-Fi access. If there is any problem like that then the position of the router might be wrong. You have to check the antennas in the device and make sure that they are positioned properly. Also ensure whether the router is able to get the signal in the place where you have placed. If you find any problem in these cases, then you should consider moving the router. Place that in different places and check whether you can get the connection or not. However it will get the signal in a particular place. Once you find that, then place the router in that area and maintain the proper positioning to avoid any inconveniences in the future.

If you still facing the issues in the wifi connection then you have to restore the settings and change them to the default settings. But if you want to try those settings again keep a note on it and then restore them. It is because when you try restoring the entire settings, those things will be completely deleted. Hence it is better to save them for your future reference. After the restoring process, you have to try again. Now you may get the internet access. This is one of the most common ways that people need to try when they are not getting the proper wi-fi connection.

In some of the situations, your wireless adapter and its service might have corrupted and that may be the main reason for the problems that you are facing. When you face such issues, you need to uninstall the wireless adapter driver and its software and install them again. Now you are able to access the internet through the Wi-Fi connection. Most of the people do not aware of this solution and they will prefer some professional assistance in their location. Even if they take their system to them, they will also perform the same process. Therefore it is better to avoid spending money for these cases and you have to try that on your own.

Most of the routers will be having a firmware which will manage all the things that they do. Hence you need to check the settings of that firmware and make sure that there are no issues in that. If you find any problems there then you have to change that and try connecting to a network again. Likewise there are plenty of ways to sort of the issues that occurs in the Wi-Fi connection so that you can easily solve on your own. All these things are very basic and hence anyone can simply try them. Instead of spending more money to solve these problems, it is better to acquire some knowledge in this case. Hence you can save money and also troubleshoot the errors that happen in the wi-fi connection. If you want to know more methods for this purpose, you can go through the plenty of online sites and gather many ideas and methods.